Use High-Quality US Green Building Council LEED-AP-ID+C Dumps- Try Free Demo

For a bicycle network to demonstrate compliance with Location and Transportation Credit, Bicycle Facilities, the bicycle network must connect to

Afive bicycle trails

Bat least eight diverse uses

Ca restaurant, a grocery shop, a church and two bus lines

Da rapid transit stop that is within 3 mi. (5 km) biking distance of the project boundary

Question 2

Which of the following must be considered in order to meet Energy and Atmosphere Prerequisite, Fundamental Refrigerant Management if the tenant requires 24-hour cooling in a server room?

ABase-building chiller specifications

BCFC-free refrigerants in tenant cooling units

CTemperature monitoring of building cooling water

DENERGY STAR compliant cooling units with low CFCs

Question 3

A project team member has prepared a map and an accompanying table as documentation for Location and Transportation Credit, Surrounding Density and Diverse Uses, Option 2. Diverse Uses. The map includes the location of each use, the location of the project, and the main entrance of the building. The table includes the distance to each use, the name of each use, and the category of each use. The team lead reviews the documentation and notes an important missing item. Which of the following s the most important item to add to the documentation?

AA description of each use

BThe location of parking lots near each use

CWalking routes from the project to each use

DA calculation of the expected number of project occupants who will visit each use

Question 4

A project owner is seeking Location & Transportation Credit, Surrounding Density and Diverse Uses for an office that is being relocated. In order to promote walkability and reduce the distance driven by employees, which of the following solutions should the project owner consider?

AAn employee transportation management plan

BA location that has retail shops within the same building

CAn employee survey measuring occupant usage of public transit

DA location that is within 1/2 mi. (0.80 km) of four different basic services

Question 5

To determine the area of interior nonstructural elements, the LEED AP will include which one of the following in the calculation for Materials and Resources Credit, Interiors Life Cycle Impact Reduction, Option 1. Interior Reuse?

AUp to three layers of a floor assembly

BItems that are demolished and not replaced

CThe interior side of exterior windows and doors

DHazardous materials that are remediated as part of the project

Answer : B

For the Materials and Resources Credit, Interiors Life Cycle Impact Reduction, Option 1. Interior Reuse, the calculation includes items that are demolished and not replaced.This is because the credit aims to encourage the reuse of interior nonstructural elements to reduce the need for new materials and minimize waste, thus contributing to a reduction in life cycle impacts1.

LEED v4 Reference Guide for Interior Design and Construction2.

LEED credit library for Interiors Life-Cycle Impact Reduction3.

LEEDuser's guide on CI-v4.1 MRc2: Interiors life-cycle impact reduction1.

In the context of LEED AP Interior Design + Construction, especially under Materials and Resources Credit for Interiors Life Cycle Impact Reduction, Option 1. Interior Reuse, the aim is to encourage the reuse of interior nonstructural elements to reduce the need for new materials and minimize waste. The calculation for this credit involves determining the area of interior nonstructural elements that are reused. Items that are demolished and not replaced are included in this calculation because their non-replacement implies a reduction in the demand for new materials, thereby contributing to resource conservation and waste minimization. This approach aligns with the LEED principles of sustainable materials management and waste reduction. It's important to note that the calculation excludes elements that are not part of the interior nonstructural scope, such as exterior windows, doors, and structural floor assemblies. Hazardous materials remediated as part of the project are also excluded, as their handling is governed by specific environmental and health safety regulations. Reference:

LEED v4 for Interior Design and Construction Reference Guide

LEED v4 BD+C Reference Guide, specifically the sections related to Materials and Resources Credit, Interiors Life Cycle Impact Reduction

Unlock All Features of US Green Building Council LEED-AP-ID+C Dumps Software

Just have a look at the best and updated features of our LEED-AP-ID+C dumps which are described in detail in the following tabs. We are very confident that you will get the best deal on this platform.

Select Question
Types you want

Set your desired
pass percentage

Allocate Time
(Hours: Minutes)

Create Multiple
Practice test with
limited questions

Customer
Support

Latest Success Metrics For actual LEED-AP-ID+C Exam

This is the best time to verify your skills and accelerate your career. Check out last week's results, more than 90% of students passed their exam with good scores. You may be the Next successful Candidate.

95%

Average Passing Scores in final Exam

91%

Exactly Same Questions from these dumps

90%

Customers Passed US Green Building Council LEED-AP-ID+C exam