Get Fortinet NSE5_FSM-6.3 Exam Practice Questions - Real and Updated

Answer : C

Incident Creation in FortiSIEM: Incidents in FortiSIEM are created based on specific patterns and conditions defined within the system.

Group By Function: The 'Group By' section in the 'Edit SubPattern' window specifies how the data should be grouped for analysis and incident creation.

Impact of Grouping: The way data is grouped affects the number of incidents generated. Each unique combination of the grouped attributes results in a separate incident.

Exhibit Analysis: In the provided exhibit, the 'Group By' section lists 'Reporting Device,' 'Reporting IP,' and 'User.' This means incidents will be created for each unique combination of these attributes.

Reference: FortiSIEM 6.3 User Guide, Rule and Pattern Creation section, which details how grouping impacts incident generation.

Answer : B

FortiSIEM Architecture: In FortiSIEM, collectors gather data from various sources and send this data to supervisors and workers within the FortiSIEM architecture.

Communication Requirements: For collectors to effectively send data to the FortiSIEM system, specific communication channels must be open.

Port Usage: The primary port used for secure communication between the collectors and the FortiSIEM infrastructure is HTTPS (port 443).

Network Configuration: When configuring collectors in geographically separated sites, the HTTPS port must be open for the collectors to communicate with both the supervisor and the worker upload settings addresses. This ensures that the collected data can be securely transmitted to the appropriate processing and analysis components.

Reference: FortiSIEM 6.3 Administration Guide, Network Ports section details the necessary ports for communication within the FortiSIEM architecture.

Answer : A, C

License Renewal Process: When renewing a FortiSIEM license, it is essential to provide the system ID, which uniquely identifies the FortiSIEM instance.

Commands to Retrieve System ID:

phgetHWID: This command retrieves the hardware ID of the FortiSIEM appliance.

Usage: Run the command phgetHWID in the CLI to obtain the hardware ID.

phgetUUID: This command retrieves the universally unique identifier (UUID) for the FortiSIEM system.

Usage: Run the command phgetUUID in the CLI to obtain the UUID.

Verification: Both phgetHWID and phgetUUID are valid commands for retrieving the necessary system IDs required for license renewal.

Reference: FortiSIEM 6.3 Administration Guide, Licensing section details the commands and procedures for obtaining system identification information necessary for license renewal.

Answer : B

Answer : B