The output of a policy route table entry is shown.
Which type of policy route does the output show?
Answer : C
To determine the type of policy route, we must interpret the specific flags and fields visible in the diagnose firewall proute list (or similar kernel table) output provided in the exhibit
Identify Key Indicators:
The most critical field in the output is vwl_service=1(test123).
It also lists vwl_mbr_seq=1 5.
Decode the Terminology:
vwl: This stands for Virtual WAN Link. In FortiOS, 'Virtual WAN Link' is the legacy internal name for the SD-WAN feature. Even in newer firmware versions (7.x), the kernel and CLI debugs often still refer to SD-WAN objects as vwl.
vwl_service: This specifically refers to an SD-WAN Rule (also known as an SD-WAN Service). The name (test123) is the name given to that specific SD-WAN rule by the administrator.
Evaluate the Options:
A & D (Regular Policy Route): Standard policy routes (configured under config router policy) do not carry the vwl_service tag. They are typically identified by simple gateway or interface instructions without the SD-WAN service abstraction.
B (ISDB Route): While SD-WAN rules can use the Internet Service Database (ISDB) as a destination, the structure of the route entry shown here---specifically defined by a vwl_service ID---classifies it fundamentally as an SD-WAN rule, regardless of the destination object.
C (An SD-WAN rule): The presence of vwl_service and vwl_mbr_seq (SD-WAN member sequence) definitively identifies this entry as a rule generated by the SD-WAN subsystem.
Conclusion: The output shows a route controlled by the SD-WAN engine (vwl), confirming it is an SD-WAN rule.
FortiGate Security 7.6 Study Guide (SD-WAN): 'In the kernel routing table and debugs, SD-WAN rules are often referenced as vwl (Virtual WAN Link) services. The vwl_service field indicates the specific SD-WAN rule ID and name.'
In IKEv2, which exchange establishes the first CHILD_SA?
Answer : D
The correct answer is D. IKE_AUTH.
The study guide explicitly states:
''IKE_Auth exchange:
* Performs the mutual authentication of two IKE endpoints.
* Configures settings like IP/mask, DNS, and so on.
* Sets up the piggyback of a child SA. Negotiates IP flow and security settings for the IPsec SA.''
It also says:
''By default, a piggyback child (IPsec) SA is negotiated along with the IKEv2 SA during IKE_AUTH. If additional IPsec SAs are needed ... they are negotiated during subsequent CREATE_CHILD_SA exchanges.''
Why the other options are wrong:
A . IKE_SA_INIT is incorrect because this exchange negotiates the security settings to protect the IKE traffic, not the first CHILD_SA.
B . INFORMATIONAL is incorrect because it is used to convey control messages between IKE endpoints.
C . CREATE_CHILD_SA is incorrect for the first CHILD_SA, because it is used to create new additional child SAs or rekey existing ones after the initial exchange.
An administrator Is expecting to receive advertised route 8.8.8.8/32 from FGT-
Answer : B
The 8.8.8.8/32 route is visible in the OSPF database on FGT-B but not installed into the routing table---the most likely explanation is that FGT-B is filtering it from being installed.
Unlock All Features of Fortinet FCSS_NST_SE-7.6 Dumps Software
Just have a look at the best and updated features of our FCSS_NST_SE-7.6 dumps which are described in detail in the following tabs. We are very confident that you will get the best deal on this platform.
Select Question Types you want
Set your desired pass percentage
Allocate Time (Hours: Minutes)
Create Multiple Practice test with limited questions
Customer Support
Latest Success Metrics For actual FCSS_NST_SE-7.6 Exam
This is the best time to verify your skills and accelerate your career. Check out last week's results, more than 90% of students passed their exam with good scores. You may be the Next successful Candidate.
95%
Average Passing Scores in final Exam
91%
Exactly Same Questions from these dumps
90%
Customers Passed Fortinet FCSS_NST_SE-7.6 exam
OUR SATISFIED CUSTOMER REVIEWS
David Smith
June 16, 2026
When I got registered for Fortinet FCSS_NST_SE-7.6 exam, I was so afraid even to try. I gave-up initially, but then I found Premiumumps and today I am proud to make a right decision. I only spend 7 days in preparation, but the result was unanticipated. I got 100% marks and finally advanced my credentials.
Mia Elizabeth
June 15, 2026
I passed the Fortinet FCSS_NST_SE-7.6 exam with the help of Premiumdumps. I am glad to chose the right material to become successful in my career.
Yuko Tanaka
June 13, 2026
Premiumsdumps practice questions prepared me well for my Fortinet FCSS_NST_SE-7.6 exams. And helped me to eliminate the exam anxiety. I didn’t feel any pressure while in the exam, because the practice exam of Premiumdumps was quite similar and helped me to pass exam on the first try.
Jhonson
June 10, 2026
Premiumdumps is providing a very reliable support to all of the customers and so to me! I am very much obliged! I got 85% marks in my Certification test and this happened just because of Premiumdumps.
Emily Johnson
June 9, 2026
I was so afraid even to attempt Fortinet FCSS_NST_SE-7.6 exam, but then fortunately Premiumdumps happened to me like a blessing. I only prepared for the exam, for a week only and performed like an expert. Premiumdumps offered actual dumps to prepare for my certification exam in easy formats. I am really thankful to Premiumdumps for achieving success in my career.
James Henry
June 6, 2026
Premiumdumps made me self-confident and assured with success. Its real exam simulation and self assessment tools helped me to pass FCSS_NST_SE-7.6 exam with good grades.
Leon Müller
June 4, 2026
I wish to share enthusiastically that I have finally advanced the credentials. And this has become possible just because of the Premiumdumps exam preparation material.