Get F5 Networks 303 Exam Dumps

A VLAN has the following objects configured:

Self-IP 10.10.10.100 with port lockdown set to Allow default

Virtual server 10.10.10.100:443 with UDP profile enabled

Virtual server 10.10.10.0/24 port forwarding virtual server

Global destination NAT forwarding 10.10.10.100 to internal server 172.168.10.100

Which object will process this request when https://10.10.10.100 is entered into a browser?

A BIG-IP device has only LTM and ASM modules provisioned. Both have nominal provisioning level. The BI6-IP Administrator wants to dedicate more resources to the LTM module. The ASM module must remain enabled. Which tmsh command should the BIG-IP Administrator execute to obtain the desired result?

A pool of four servers has been partially upgraded for two new servers with more memory and CPU capacity. The BIG-IP Administrator must change the load balance method to consider more connections for the two new servers. Which load balancing method considers pool member CPU and memory load?

A BIG-IP system has the following configuration:

* SNAT is set to Auto Map

* There are two VLANs internal and external

* Default route is pointed to the gateway on external VLAN

* Self P for internal VLAN is 1921.1.2

* Self IP for external VLAN is 192.1.2.2

* Floating IP addresses for internal VLAN is 192.1.1.1

* Floating IP addresses for external VLAN is 192.1.2.1

* The Virtual Server IP address is 192.1.1.100

Which IP address does the BIG-IP system use first when traffic reaches the servers on the internal VLAN?

A BIG-IP Administrator need to ensure that a pool member and down by the monitor the BIG-IP system

sends existing connections to another be pool member.

Which should the BIG-IP Administrator perform to meet this goal?