Get CompTIA N10-009 Exam Practice Questions - Real and Updated

Answer : D

Multimode fiber optic cables involve the transmission of light signals that bounce off the core's cladding as they travel down the fiber. This characteristic differentiates it from single-mode fiber, where the light travels directly down the fiber without reflecting off the cladding.

Here are some detailed points about multimode fiber cables:

Construction: Multimode fibers have a larger core diameter, typically 50 or 62.5 microns, compared to single-mode fibers, which have a core diameter of about 9 microns.

Light Propagation: The larger core of multimode fiber allows multiple light modes to propagate. These modes travel at different angles, leading to reflections off the core-cladding boundary.

Distance and Bandwidth: Due to modal dispersion, where different light modes arrive at the receiver at different times, multimode fibers are suited for shorter distance applications compared to single-mode fibers. Typical distances are up to 550 meters for 10 Gbps Ethernet using OM4 multimode fiber.

Applications: Multimode fibers are commonly used in LANs (Local Area Networks), data centers, and for shorter distance data transmission due to their cost-effectiveness and ease of installation.

Network Reference:

CompTIA Network+ N10-007 Official Certification Guide, which covers fiber optic technologies, including the differences between multimode and single-mode fibers.

Cisco Networking Academy: Provides training materials and reference guides on the properties of different fiber optic cables.

Fiber Optic Association (FOA): A professional society dedicated to fiber optics, offering extensive information and certification on fiber optic technologies.

Multimode fibers are specifically designed for short-range communication with higher data rates and are typically used in environments like data centers, where high bandwidth over shorter distances is crucial. The reflections off the cladding, inherent to multimode fiber, facilitate this high-capacity communication.

Answer : B

*API (Application Programming Interface) enables secure and granular access control, remote management, and logging, making it ideal for network monitoring.

*SNMP (A) is mainly used for device monitoring but lacks centralized logging and user-based privilege control.

*SIEM (C) is a security monitoring tool focused on log collection, not device management.

*SSO (D) is related to authentication, not monitoring.

Reference: CompTIA Network+ N10-009 Official Documentation -- Network Monitoring & Management Technologies.

Answer : D

The 802.11n standard supports MIMO (Multiple Input Multiple Output), which allows multiple antennas to increase data throughput and improve reliability. Additionally, it uses non-overlapping channels in the 5 GHz band (and optionally the 2.4 GHz band), making it a good choice for high-speed, interference-resistant wireless connections. (Reference: CompTIA Network+ Study Guide, Chapter on Wireless Technologies)

Answer : A

Port 22 is used for Secure Shell (SSH), which enables encrypted remote login and command execution on network devices.

Port 23 = Telnet (unencrypted)

Port 80 = HTTP

Port 123 = NTP

From Andrew Ramdayal's guide:

''SSH uses port 22 to provide secure command-line access to devices such as switches and routers. Unlike Telnet (port 23), SSH encrypts session traffic, making it the preferred method for remote administration.''

Answer : C

Border Gateway Protocol (BGP): BGP is the most commonly used routing protocol for interconnecting WANs, especially across the internet. It is used for exchanging routing information between autonomous systems (AS), making it the backbone protocol for large-scale WANs.

IGP (A): Interior Gateway Protocols like OSPF and EIGRP are typically used within a single AS, not between them.

EIGRP (B): While it is efficient, EIGRP is primarily used for intra-domain routing and not ideal for WAN interconnection.

OSPF (D): While OSPF can be used for WANs, it is not as common as BGP for inter-AS communication.