Get CompTIA 220-1201 Exam Practice Questions - Real and Updated

Answer : D

The correct answer is D. RAID 10 (also called RAID 1+0).

According to CompTIA A+ Core 1 220-1201 objectives under Storage:

RAID 10 combines the mirroring of RAID 1 with the striping of RAID 0. This provides both high data availability (because each drive has a mirror) and improved performance (because data is striped across multiple disks).

RAID 10 requires a minimum of four drives and is suitable for servers that handle high I/O workloads while maintaining redundancy.

Why the other options are incorrect:

A . RAID 1: Provides mirroring for redundancy but does not improve performance as effectively as RAID 10.

B . RAID 0: Provides striping for performance but has no redundancy; a single drive failure results in data loss.

C . RAID 5: Provides parity and can tolerate one drive failure with decent read performance, but write performance is lower than RAID 10 and rebuilds can impact system performance under heavy load.

CompTIA A+ Core 1 (220-1201) Exam Objectives -- Storage: ''Given a scenario, configure RAID levels to balance performance, availability, and redundancy.''

Mike Meyers' CompTIA A+ Certification Guide, 13th Edition, Chapter on RAID and Storage Arrays.

Answer : A

A network switch operates at Layer 2 (Data Link Layer) of the OSI model and forwards traffic using MAC addresses. CompTIA A+ teaches that switches maintain a MAC address table, learning which devices reside on each port. When a frame arrives, the switch checks the destination MAC address and forwards it only to the appropriate port, reducing unnecessary traffic and improving performance.

Routers, on the other hand, operate at Layer 3 and forward traffic based on IP addresses, not MAC addresses. Firewalls inspect traffic for security policies and operate across multiple OSI layers but do not perform MAC-based forwarding. A gateway is a broad term that generally refers to a device connecting different networks or protocols, typically involving routing, not MAC-based switching.

Thus, the device specifically responsible for forwarding frames based on MAC address lookup is the switch.

Answer : B

Port 22 is used by SSH (Secure Shell), which is the standard protocol for secure remote administration of network devices such as switches, routers, firewalls, and Linux-based systems. CompTIA A+ Core 1 emphasizes knowing common ports and selecting secure management methods. SSH provides encrypted communication for both authentication and the session data, protecting usernames, passwords, and command output from being intercepted by packet sniffers. This makes it the preferred choice over older remote access methods.

In contrast, port 23 is Telnet, which is also used for remote terminal access but sends traffic in cleartext, making it insecure and generally discouraged in modern environments. Port 21 is FTP control traffic, used for file transfers and typically not secure unless paired with FTPS or replaced by SFTP (which actually runs over SSH on port 22). Port 25 is SMTP, used for sending email between mail servers and is unrelated to remote device management. Therefore, for secure remote access to a network device, SSH on port 22 is the correct answer.

Answer : A

Assigning astatic IP addressto a network printer ensures it always retains the same address, allowing users and print servers to consistently reach it even after a reboot or network refresh.

Option B (Private address):Refers to address ranges (e.g., 192.168.x.x) doesn't guarantee address persistence.

Option C (Wi-Fi):Is a connection method, not a method of IP assignment.

Option D (Dynamic addressing):Via DHCP, which can change over time unless reservations are made (less reliable).

CompTIA A+ Core 1 Exam Objective Reference:

Objective 3.4: Given a scenario, install and configure printers.

Answer : D